Skip to content
Wobistro

Fryer and fryer bank

A fryer cooks food in a vat of hot oil; a bank joins several vats, sometimes with a dump station to drain and hold fried food.

Fryer and fryer bank, 3D model from the Wobistro kitchen catalogue
The default configuration as modelled in the Wobistro studio: a planning model, not a manufacturer photo.
FrontPlan 0.42 m 1.14 m 0.85 m
Planning envelope of the default configuration, 0.42 × 0.85 × 1.14 m. Not a manufacturer drawing.

Configurations and nominal sizes

Open vat
SizeWidth × Depth × Height (m)Mounting
Oil capacity per vat: 50 lb · Vats: 1 · Dump station: No0.42 × 0.85 × 1.14Floor
Oil capacity per vat: 75 lb0.53 × 0.85 × 1.14Floor
Vats: 20.84 × 0.85 × 1.14Floor
Vats: 31.26 × 0.85 × 1.14Floor
Vats: 41.68 × 0.85 × 1.14Floor
Dump station: Yes0.82 × 0.85 × 1.14Floor

Nominal sizes describe a class of equipment, including handles and guards. They are planning envelopes, not manufacturer installation dimensions.

Options you can set

Select the placed piece in the studio to change these. Size-driving options resize the piece.

Oil capacity per vat
50 lb, 40 lb, or 75 lb
Vats
1, 2, 3, or 4
Dump station
No or Yes

Hood and planning checks

The planner looks for a Type I exhaust canopy over this equipment, overhanging each open side by 15.2 cm.

ICC International Mechanical Code, sections 507.1 and 507.4.1

Facing work stations are checked for an aisle of at least 1.05 m between their fronts. This is a Wobistro planning target.

Each work station is checked for a clear walking route of 3 m or less to a handwashing sink. This is a Wobistro planning target.

FDA Food Code, sections 5-204.11 and 5-205.11

The kitchen space programme allows 1 m of working space in front of it (planning estimate).

These are planning checks, not approval. Confirm hood, fire, gas and health requirements with the code adopted where the kitchen is.

Connections

Typical connection: gas.

Connection types are planning information. Confirm loads, gas ratings and drainage with the selected model and your engineer.

In the operations simulator

When you simulate the layout you drew, this equipment loads the Fry station.

ConfigurationPlanning capacityBasis
Vats: 131.8 kg/hPublished reference
Vats: 263.6 kg/hPublished reference
Vats: 395.4 kg/hPublished reference
Vats: 4127 kg/hPublished reference

Simulator figures are planning starting points. Time your own menu on your own equipment.

In example venues

This equipment is placed in these example venues, which you can open in 3D.

Plan it in your kitchen

Opens the studio with this equipment placed and selected in the venue you last worked on, or in a new room if you have none. You can try it without an account.

Place it in the studio

Or open “Corner burger restaurant with open kitchen”, an example venue that uses it.