Skip to content
Wobistro

Handwashing sink

A handwashing sink is reserved for washing hands, separate from food and dish sinks.

Handwashing sink, Wall-mounted, 3D model from the Wobistro kitchen catalogue
The default configuration as modelled in the Wobistro studio: a planning model, not a manufacturer photo.
FrontPlan 0.45 m 0.45 m 0.4 m
Planning envelope of the default configuration, 0.45 × 0.4 × 0.45 m. Not a manufacturer drawing.

Configurations and nominal sizes

ConfigurationWidth × Depth × Height (m)Mounting
Wall-mounted0.45 × 0.4 × 0.45Wall
Pedestal0.45 × 0.4 × 1.2Floor

Nominal sizes describe a class of equipment, including handles and guards. They are planning envelopes, not manufacturer installation dimensions.

Planning checks

Wall-mounted: Mounted on the wall by default, with its underside 0.9 m above the floor.

The planner checks every configured work station for a clear walking route of 3 m or less to a handwashing sink. This is a Wobistro planning target.

FDA Food Code, sections 5-204.11 and 5-205.11

The kitchen space programme allows 0.6 m of working space in front of it (planning estimate).

These are planning checks, not approval. Confirm hood, fire, gas and health requirements with the code adopted where the kitchen is.

Connections

Typical connection: water supply and drain.

Connection types are planning information. Confirm loads, gas ratings and drainage with the selected model and your engineer.

In example venues

This equipment is placed in these example venues, which you can open in 3D.

Plan it in your kitchen

Opens the studio with this equipment placed and selected in the venue you last worked on, or in a new room if you have none. You can try it without an account.

Place it in the studio

Or open “Corner burger restaurant with open kitchen”, an example venue that uses it.