Skip to content
Wobistro

Cheesemelter

A cheesemelter is a lighter overhead unit for melting cheese and holding plates warm just before the pass.

Cheesemelter, 3D model from the Wobistro kitchen catalogue
The default configuration as modelled in the Wobistro studio: a planning model, not a manufacturer photo.
FrontPlan 0.75 m 0.38 m 0.42 m
Planning envelope of the default configuration, 0.75 × 0.42 × 0.38 m. Not a manufacturer drawing.

Configurations and nominal sizes

Finishing shelf
Width × Depth × Height (m)Mounting
0.75 × 0.42 × 0.38Wall

Nominal sizes describe a class of equipment, including handles and guards. They are planning envelopes, not manufacturer installation dimensions.

Hood and planning checks

The planner looks for a Type I exhaust canopy over this equipment, overhanging each open side by 15.2 cm.

ICC International Mechanical Code, sections 507.1 and 507.4.1

Mounted on the wall by default, with its underside 1.42 m above the floor.

Facing work stations are checked for an aisle of at least 1.05 m between their fronts. This is a Wobistro planning target.

Each work station is checked for a clear walking route of 3 m or less to a handwashing sink. This is a Wobistro planning target.

FDA Food Code, sections 5-204.11 and 5-205.11

These are planning checks, not approval. Confirm hood, fire, gas and health requirements with the code adopted where the kitchen is.

Plan it in your kitchen

Opens the studio with this equipment placed and selected in the venue you last worked on, or in a new room if you have none. You can try it without an account.

Place it in the studio