Skip to content
Wobistro

Steamer

A steamer cooks food in pans with steam, on a countertop or in a floor-standing cabinet.

Steamer, Floor cabinet, 3D model from the Wobistro kitchen catalogue
The default configuration as modelled in the Wobistro studio: a planning model, not a manufacturer photo.
FrontPlan 0.85 m 1.65 m 0.84 m
Planning envelope of the default configuration, 0.85 × 0.84 × 1.65 m. Not a manufacturer drawing.

Configurations and nominal sizes

ConfigurationWidth × Depth × Height (m)Mounting
Countertop0.6 × 0.68 × 0.61On a counter or stand
Floor cabinet0.85 × 0.84 × 1.65Floor

Nominal sizes describe a class of equipment, including handles and guards. They are planning envelopes, not manufacturer installation dimensions.

Options you can set

Select the placed piece in the studio to change these. Size-driving options resize the piece.

Hinge side
Left or Right

Hood and planning checks

The planner looks for a Type II exhaust canopy over this equipment, overhanging each open side by 15.2 cm.

A Type I canopy can also serve Type II equipment.

ICC International Mechanical Code, sections 507.1 and 507.4.1

Facing work stations are checked for an aisle of at least 1.05 m between their fronts. This is a Wobistro planning target.

Each work station is checked for a clear walking route of 3 m or less to a handwashing sink. This is a Wobistro planning target.

FDA Food Code, sections 5-204.11 and 5-205.11

The kitchen space programme allows 1 m of working space in front of it (planning estimate).

These are planning checks, not approval. Confirm hood, fire, gas and health requirements with the code adopted where the kitchen is.

Connections

Typical connection: electric.

Typical connection: water supply and drain.

Connection types are planning information. Confirm loads, gas ratings and drainage with the selected model and your engineer.

In example venues

This equipment is placed in these example venues, which you can open in 3D.

Also in Shanghai projection dining room.

Plan it in your kitchen

Opens the studio with this equipment placed and selected in the venue you last worked on, or in a new room if you have none. You can try it without an account.

Place it in the studio

Or open “Ramen shop with a counter and a wok line”, an example venue that uses it.